{"id":1341,"date":"2026-07-29T01:30:51","date_gmt":"2026-07-29T01:30:51","guid":{"rendered":"https:\/\/isbm-blowmolding.com\/?post_type=product&p=1341"},"modified":"2026-07-29T10:35:28","modified_gmt":"2026-07-29T10:35:28","slug":"zq80-injection-blow-molding-machine-replacement-for-bloma-ibm85-model","status":"publish","type":"product","link":"https:\/\/isbm-blowmolding.com\/fr\/produit\/zq80-injection-blow-molding-machine-replacement-for-bloma-ibm85-model\/","title":{"rendered":"Machine de moulage par injection-soufflage ZQ80, remplacement pour le mod\u00e8le Bloma IBM85"},"content":{"rendered":"

Our company provides a high-efficiency and energy-saving ZQ80 Injection Blow Molding Machine Replacement for Bloma IBM85 Model, purpose-built for mass production of small and medium-sized plastic bottles. Equipped with precise temperature and pressure control systems, this blow injection moulding machine ensures uniform wall thickness, smooth surface finish, and stable dimensional accuracy across every production run. Applications span pharmaceutical bottles, cosmetic containers, personal care packaging, food-grade HDPE bottles, beverage containers, and chemical packaging, making it one of the most versatile plastic injection blow molding machines available in the 80-ton clamping class today.<\/p>\n

This full electric injection blow molding machine operates entirely without hydraulic oil, with all movements driven by servo motors. It achieves a 20% shorter cycle time versus conventional hydraulic models, reaching 8.2 seconds per cycle for 30 ml bottles, which translates to 105,000 bottles per day under standard conditions and a maximum daily output of 115,000 bottles. Energy consumption is reduced by approximately 30%, drawing around 12 kWh per hour during 30 ml bottle production. Low-noise servo operation is complemented by absolute encoders on every axis, delivering the precision and repeatability demanded by pharmaceutical GMP lines and high-speed cosmetic packaging factories alike. A special clamping structure with 40 to 80 ton adjustable clamping force covers a broad range of cavity configurations, while the patented bottom-up design eliminates lubricating oil exposure in the mold zone, meeting hygiene requirements for both pharmaceutical and food-contact plastic packaging. For unattended production, the conveyor exit can be integrated with vision inspection systems, side-leak testers, labeling machines, and automatic packaging equipment, completing a turnkey one step injection blow molding machine solution.<\/p>\n

\"Machine<\/h2>\n

Cavitation du moule (\u00e0 titre de r\u00e9f\u00e9rence)<\/h2>\n\n\n\n\n\n
Volume approximatif<\/strong><\/td>\n10 ml<\/strong><\/td>\n30 ml<\/strong><\/td>\n60 ml<\/strong><\/td>\n100 ml<\/strong><\/td>\n250 ml<\/strong><\/td>\n500 ml<\/strong><\/td>\n1000 ml<\/strong><\/td>\n<\/tr>\n<\/thead>\n
Cavitation maximale<\/span><\/span><\/td>\n20<\/span><\/span><\/td>\n18<\/span><\/span><\/td>\n14<\/span><\/span><\/td>\n12<\/span><\/span><\/td>\n8<\/span><\/td>\n5-6<\/span><\/td>\n3-4<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sp\u00e9cifications techniques<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Article<\/strong><\/td>\nUnit\u00e9<\/strong><\/td>\nZQ80<\/strong><\/td>\n<\/tr>\n<\/thead>\n
Syst\u00e8me d'injection<\/b><\/span><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
Diam\u00e8tre de la vis<\/span><\/td>\nmm<\/span><\/td>\n55<\/span><\/td>\n<\/tr>\n
Vis L\/D<\/span><\/td>\n%<\/span><\/td>\n22:1<\/span><\/td>\n<\/tr>\n
Poids d'injection !<\/span><\/td>\ng<\/span><\/td>\n466<\/span><\/td>\n<\/tr>\n
puissance de chauffage<\/span><\/td>\nKW<\/span><\/td>\n11<\/span><\/td>\n<\/tr>\n
Nombre de zones de barils<\/span><\/td>\n<\/td>\n4+N<\/span><\/td>\n<\/tr>\n
coup d'injection<\/span><\/td>\nmm<\/span><\/td>\n180<\/span><\/td>\n<\/tr>\n
Syst\u00e8me de serrage<\/b><\/span><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
Force de serrage de l'injection<\/span><\/td>\nKN<\/span><\/td>\n800<\/span><\/td>\n<\/tr>\n
Coup d'ouverture pour injection<\/span><\/td>\nmm<\/span><\/td>\n140<\/span><\/td>\n<\/tr>\n
Force de serrage du soufflage<\/span><\/td>\nKN<\/span><\/td>\n120<\/span><\/td>\n<\/tr>\n
coup d'ouverture pour souffler<\/span><\/td>\nmm<\/span><\/td>\n140<\/span><\/td>\n<\/tr>\n
Hauteur de levage de la table rotative<\/span><\/td>\nmm<\/span><\/td>\n70<\/span><\/td>\n<\/tr>\n
Moule<\/b><\/span><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
Dimensions maximales du plateau (L x l)<\/span><\/td>\nmm<\/span><\/td>\n800×400<\/span><\/td>\n<\/tr>\n
\u00c9paisseur du moule<\/span><\/td>\nmm<\/span><\/td>\n280<\/span><\/td>\n<\/tr>\n
Diam\u00e8tre de la bouteille<\/span><\/td>\nmm<\/span><\/td>\n120<\/span><\/td>\n<\/tr>\n
Hauteur de la bouteille<\/span><\/td>\nmm<\/span><\/td>\n220<\/span><\/td>\n<\/tr>\n
Hauteur de bouteille appropri\u00e9e<\/span><\/td>\nmm<\/span><\/td>\n1-2000<\/span><\/td>\n<\/tr>\n
Coup de d\u00e9nudage<\/span><\/td>\nmm<\/span><\/td>\n230<\/span><\/td>\n<\/tr>\n
Syst\u00e8me hydraulique<\/b><\/span><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
Pression hydraulique<\/span><\/td>\nCarte<\/span><\/td>\n14<\/span><\/td>\n<\/tr>\n
Puissance du moteur<\/span><\/td>\nKW<\/span><\/td>\n18.5+18.5<\/span><\/td>\n<\/tr>\n
Cycle de s\u00e9chage<\/span><\/td>\nS<\/span><\/td>\n4<\/span><\/td>\n<\/tr>\n
Puissance totale<\/span><\/td>\nKW<\/span><\/td>\n55<\/span><\/td>\n<\/tr>\n
Puissance de fonctionnement<\/span><\/td>\n%<\/span><\/td>\n52-70<\/span><\/td>\n<\/tr>\n
Autres<\/b><\/span><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
Pression minimale de l'air comprim\u00e9<\/span><\/td>\nMPa<\/span><\/td>\n0.8-1.2<\/span><\/td>\n<\/tr>\n
Capacit\u00e9 d'air comprim\u00e9<\/span><\/td>\nM\u00b3\/min<\/span><\/td>\n0.8<\/span><\/td>\n<\/tr>\n
d\u00e9bit d'eau<\/span><\/td>\nM\u00b3\/h<\/span><\/td>\n4<\/span><\/td>\n<\/tr>\n
Pression de l'eau de refroidissement<\/span><\/td>\nMPa<\/span><\/td>\n0.3-0.4<\/span><\/td>\n<\/tr>\n
Dimensions (L x l x H)<\/span><\/td>\nM<\/span><\/td>\n4.5×1.6×2<\/span><\/td>\n<\/tr>\n
Poids net<\/span><\/td>\nTonne<\/span><\/td>\n10<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n

Marque et mod\u00e8le rempla\u00e7ables<\/h2>\n<\/div>\n
\n\n\n\n\n\n\n\n\n\n
Toujours-Puissance<\/strong><\/td>\nForce de serrage<\/strong><\/td>\nJomar<\/strong><\/td>\nSUMA<\/strong><\/td>\nUniloy<\/strong><\/td>\nBloma<\/strong><\/td>\n<\/tr>\n<\/thead>\n
ZQ40<\/span><\/td>\n40T<\/span><\/td>\nIBM40<\/span><\/td>\n40iB<\/span><\/td>\nUIB70<\/span><\/td>\nIBM45<\/span><\/td>\n<\/tr>\n
ZQ60<\/span><\/td>\n60T<\/span><\/td>\nIBM65<\/span><\/td>\n65iB<\/span><\/td>\nUIB90<\/span><\/td>\nIBM50<\/span><\/td>\n<\/tr>\n
ZQ80<\/span><\/td>\n80T<\/span><\/td>\nIBM85S<\/span><\/td>\n85iB<\/span><\/td>\nUIB120<\/span><\/td>\nIBM85<\/span><\/td>\n<\/tr>\n
ZQ110<\/span><\/td>\n110T<\/span><\/td>\nIBM135<\/span><\/td>\n135iB<\/span><\/td>\nUIB150<\/span><\/td>\nIBM135<\/span><\/td>\n<\/tr>\n
ZQ135<\/span><\/td>\n135T<\/span><\/td>\nIBM175<\/span><\/td>\n175iB<\/span><\/td>\nUIB180<\/span><\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Diam\u00e8tre de la vis \u00e0 m\u00e9taux IBM<\/h3>\n
\n\n\n\n\n\n\n\n\n\n
Toujours-Puissance<\/strong><\/td>\nDiam\u00e8tre de la vis<\/strong><\/td>\nJomar<\/strong><\/td>\nSUMA<\/strong><\/td>\nBloma<\/strong><\/td>\n<\/tr>\n<\/thead>\n
ZQ40<\/span><\/td>\n40\/45<\/span><\/td>\n35\/40<\/span><\/td>\n40<\/span><\/td>\n45<\/span><\/td>\n<\/tr>\n
ZQ60<\/span><\/td>\n45\/50<\/span><\/td>\n45<\/span><\/td>\n40\/50<\/span><\/td>\n50<\/span><\/td>\n<\/tr>\n
ZQ80<\/span><\/td>\n55<\/span><\/td>\n55<\/span><\/td>\n50\/60<\/span><\/td>\n50<\/span><\/td>\n<\/tr>\n
ZQ110<\/span><\/td>\n65<\/span><\/td>\n65<\/span><\/td>\n65\/76<\/span><\/td>\n70<\/span><\/td>\n<\/tr>\n
ZQ135<\/span><\/td>\n70<\/span><\/td>\n70<\/span><\/td>\n65\/76<\/span><\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n

Poids d'injection de la machine IBM<\/h3>\n\n\n\n\n\n\n\n\n\n
Toujours-Puissance<\/strong><\/td>\nPoids d'injection<\/strong><\/td>\nJomar<\/strong><\/td>\nSUMA<\/strong><\/td>\nBloma<\/strong><\/td>\n<\/tr>\n<\/thead>\n
ZQ40<\/span><\/td>\n190\/260<\/span><\/td>\n180<\/span><\/td>\n169<\/span><\/td>\n180<\/span><\/td>\n<\/tr>\n
ZQ60<\/span><\/td>\n260\/383<\/span><\/td>\n205<\/span><\/td>\n169\/264<\/span><\/td>\n240<\/span><\/td>\n<\/tr>\n
ZQ80<\/span><\/td>\n466<\/span><\/td>\n300<\/span><\/td>\n333\/480<\/span><\/td>\n310\/280<\/span><\/td>\n<\/tr>\n
ZQ110<\/span><\/td>\n540<\/span><\/td>\n450\/550<\/span><\/td>\n580\/770<\/span><\/td>\n560<\/span><\/td>\n<\/tr>\n
ZQ135<\/span><\/td>\n650<\/span><\/td>\n450\/550<\/span><\/td>\n580\/770<\/span><\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n

Force de serrage par injection de machine IBM<\/h3>\n\n\n\n\n\n\n\n\n\n
Toujours-Puissance<\/strong><\/td>\nForce de serrage par injection<\/strong><\/td>\nJomar<\/strong><\/td>\nSUMA<\/strong><\/td>\nBloma<\/strong><\/td>\n<\/tr>\n<\/thead>\n
ZQ40<\/span><\/td>\n400 kN<\/span><\/td>\n340 kN<\/span><\/td>\n386 kN<\/span><\/td>\n350 kN<\/span><\/td>\n<\/tr>\n
ZQ60<\/span><\/td>\n600 kN<\/span><\/td>\n460 kN<\/span><\/td>\n580 kN<\/span><\/td>\n500 kN<\/span><\/td>\n<\/tr>\n
ZQ80<\/span><\/td>\n800 kN<\/span><\/td>\n680 kN<\/span><\/td>\n720 kN<\/span><\/td>\n700 kN<\/span><\/td>\n<\/tr>\n
ZQ110<\/span><\/td>\n1100 kN<\/span><\/td>\n1210 kN<\/span><\/td>\n1200 kN<\/span><\/td>\n1250 kN<\/span><\/td>\n<\/tr>\n
ZQ135<\/span><\/td>\n1350 kN<\/span><\/td>\n1560 kN<\/span><\/td>\n1600 kN<\/span><\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n

Taille du moule de la machine IBM<\/h3>\n\n\n\n\n\n\n\n\n\n
Toujours-Puissance<\/strong><\/td>\nTaille du moule<\/strong><\/td>\nJomar<\/strong><\/td>\nSUMA<\/strong><\/td>\nBloma<\/strong><\/td>\n<\/tr>\n<\/thead>\n
ZQ40<\/span><\/td>\n480 \u00d7 340<\/span><\/td>\n394 \u00d7 508<\/span><\/td>\n470 \u00d7 350<\/span><\/td>\n450 \u00d7 390<\/span><\/td>\n<\/tr>\n
ZQ60<\/span><\/td>\n600 \u00d7 390<\/span><\/td>\n432 \u00d7 660<\/span><\/td>\n620 \u00d7 400<\/span><\/td>\n620 \u00d7 430<\/span><\/td>\n<\/tr>\n
ZQ80<\/span><\/td>\n800 \u00d7 400<\/span><\/td>\n464 \u00d7 749<\/span><\/td>\n700 \u00d7 400<\/span><\/td>\n620 \u00d7 430<\/span><\/td>\n<\/tr>\n
ZQ110<\/span><\/td>\n1100 \u00d7 460<\/span><\/td>\n559 \u00d7 1118<\/span><\/td>\n1000 \u00d7 500<\/span><\/td>\n900 \u00d7 480<\/span><\/td>\n<\/tr>\n
ZQ135<\/span><\/td>\n1300 \u00d7 500<\/span><\/td>\n635 \u00d7 1372<\/span><\/td>\n1200 \u00d7 600<\/span><\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n

Taille de la machine IBM<\/h3>\n\n\n\n\n\n\n\n\n\n
Toujours-Puissance<\/strong><\/td>\nTaille du moule (M)<\/strong><\/td>\nJomar<\/strong><\/td>\nSUMA<\/strong><\/td>\nBloma<\/strong><\/td>\n<\/tr>\n<\/thead>\n
ZQ40<\/span><\/td>\n3,8 \u00d7 1,3 \u00d7 1,7<\/span><\/td>\n2,72 \u00d7 1,9 \u00d7 2,75<\/span><\/td>\n3,8 \u00d7 1,5 \u00d7 2,3<\/span><\/td>\n4,05 \u00d7 1,52 \u00d7 2,55<\/span><\/td>\n<\/tr>\n
ZQ60<\/span><\/td>\n3,8 \u00d7 1,4 \u00d7 1,8<\/span><\/td>\n2,92 \u00d7 1,98 \u00d7 3,41<\/span><\/td>\n4 \u00d7 1,7 \u00d7 2,3<\/span><\/td>\n620 \u00d7 430 \u00d7 2,55<\/span><\/td>\n<\/tr>\n
ZQ80<\/span><\/td>\n4,5 \u00d7 1,6 \u00d7 2<\/span><\/td>\n3,33 \u00d7 1,94 \u00d7 3,41<\/span><\/td>\n4,5 \u00d7 2 \u00d7 2,6<\/span><\/td>\n620 \u00d7 430 \u00d7 2,55<\/span><\/td>\n<\/tr>\n
ZQ110<\/span><\/td>\n5 \u00d7 1,8 \u00d7 2,2<\/span><\/td>\n3,79 \u00d7 2,4 \u00d7 3,41<\/span><\/td>\n5 \u00d7 2,4 \u00d7 2,7<\/span><\/td>\n900 \u00d7 480 \u00d7 2,55<\/span><\/td>\n<\/tr>\n
ZQ135<\/span><\/td>\n5,5 \u00d7 2 \u00d7 2,4<\/span><\/td>\n4,22 \u00d7 2,67 \u00d7 3,58<\/span><\/td>\n6 \u00d7 2,6 \u00d7 2,7<\/span><\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

Note: Brands are mentioned only to help customers choose products, not to sell those brands’ products.<\/strong><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Key Features of the ZQ80 Injection Blow Molding Machine<\/h2>\n

1. Customizable Molding Options
\nAs a customized injection blow molding machine for sale, the ZQ80 accommodates bottle volumes from 10 ml to 1000 ml across a platen size of 800 x 400 mm and a maximum bottle diameter of 120 mm. Cavity count, mold material grade, and neck-finish tooling are all configurable to customer specifications. Whether producing round cosmetic vials, rectangular lotion bottles, or complex pharmaceutical containers, this one step injection blow molding machine adapts without major retooling costs.<\/p>\n

2. Energy Efficiency
\nThis all electric injection blow molding machine reduces energy consumption by 30% versus conventional hydraulic IBM machines. At approximately 12 kWh per hour during 30 ml bottle production, the operating power factor stays between 52% and 70% of rated capacity. The servo-driven architecture eliminates the constant-run hydraulic pump found in older designs, slashing both utility costs and carbon footprint, making it the best injection blow molding machine choice for environmentally responsible manufacturers.<\/p>\n

3. High Production Capacity
\nThe ZQ80 injection blow molding machine delivers a dry cycle of just 4 seconds and a full production cycle of 8.2 seconds for 30 ml bottles, sustaining 105,000 bottles per day with a maximum of 115,000. With up to 18 cavities for 30 ml output, this IBM injection blow molding machine meets the throughput demands of high-volume pharmaceutical and FMCG packaging lines without frequent manual intervention, giving factories a measurable competitive edge in the market.<\/p>\n

4. Facilit\u00e9 d'utilisation et d'entretien
\nThe ZQ80 injection blow moulding machine uses an electric cylinder-driven injection unit and an intuitive HMI touchscreen, enabling operators to complete parameter setup and production startup quickly. The elimination of hydraulic oil circuits removes the most common maintenance task on legacy machines. Absolute encoders on each servo axis enable predictive diagnostics. Routine maintenance is limited to standard lubrication and filter checks, significantly reducing unplanned downtime and total cost of ownership for injection blow molding machine suppliers and end-users alike.<\/p>\n

5. Contr\u00f4le de la qualit\u00e9 et constance
\nPrecision servo control monitors temperature, pressure, injection speed, and blow timing in real time. The result is uniform wall thickness, a defect-free smooth surface, and dimensional accuracy within tight GMP tolerances across millions of consecutive bottles. Optional inline vision inspection detects foreign particles in the bottle body, insufficient material at the neck finish, and uneven bottom formation, maintaining 100% bottle integrity. This level of consistency is rarely achievable on older plastic injection blow molding machines in the same tonnage class.<\/p>\n

6. Compatible with Bloma IBM85 Model
\nThe ZQ80 is engineered as a drop-in replacement for the Bloma IBM85 Model. With an 800 x 400 mm platen, 800 KN injection clamping force, and a 55 mm screw diameter, it matches or exceeds the Bloma IBM85 key dimensional and performance benchmarks. Existing Bloma IBM85 molds can often be adapted to fit the ZQ80 with minimal modification, protecting tooling investment. This makes it the preferred IBM machine upgrade path for factories currently operating the Bloma IBM85 or IBM85S platform.<\/p>\n

\"Machine<\/p>\n

Principe de fonctionnement<\/h2>\n
\n

1. Preform Injection<\/h3>\n

Molten resin is metered by the 55 mm servo screw and injected into the injection cavity at precisely controlled pressure and speed. The bottle neck finish and thread geometry are formed to final dimensions at this station, ensuring 100% sealed threads with no flash. Once the preform reaches target temperature and wall distribution, the mold opens and the mandrel transfers the parison directly to the blow station without reheating, eliminating the energy penalty inherent in two-step ISBM machine processes. This single integrated flow is what makes the one step injection blow molding machine concept so efficient for pharmaceutical and cosmetic packaging lines.<\/p>\n<\/div>\n

\n

2. Blow Molding<\/h3>\n

The mandrel carrying the still-warm preform rotates to the blow station. High-pressure compressed air at 0.8 to 1.2 MPa is introduced through the mandrel, expanding the parison against the cooled blow cavity. The blow clamping force of 120 KN holds the mold securely while the bottle body conforms to the cavity geometry, producing consistent wall thickness and a smooth, glossy exterior surface. Cooling channels integrated into the blow mold rapidly solidify the bottle. The mold then opens and the turret rotates 120 degrees, advancing the blown bottle to the stripping station while simultaneously advancing a fresh preform to the blow station. This overlapping three-station action is the core efficiency driver of the ZQ80 injection blowing molding machine.<\/p>\n<\/div>\n

\n

3. Stripping<\/h3>\n

Finished bottles are automatically ejected from the mandrel rods at the stripping station and transferred to the downstream conveyor in an upright orientation, ready for inline inspection and packaging. Because all three stations, injection, blowing, and stripping, operate simultaneously in each cycle, the effective output is maximized without adding cycle time. There are no burrs, no weld lines, and no scrap edge on either the mouth or the bottom of the bottle, which is a critical advantage over extrusion blow alternatives. The scrap edge injection blow molding machine problem simply does not apply to the IBM process, producing material savings that accumulate significantly at 115,000 bottles per day volumes.<\/p>\n

\"Machine<\/p>\n

Domaines d'application<\/h2>\n
\n

Flacons pharmaceutiques<\/h3>\n

Oral liquid bottles, tablet containers, nasal spray bottles, and ophthalmic dropper bottles. The GMP-compliant bottom-up mold zone design, 100% sealed neck finishes, and optional vision inspection make this one of the most trusted pharmaceutical IBM machines for regulated markets in Europe, the US, and Asia.<\/p>\n

\n

Bouteilles de produits chimiques<\/h3>\n

HDPE and PP chemical bottles for household cleaners, industrial solvents, and agrochemical concentrates. The oil-free servo drive and bottom-up design prevent contamination, while precise wall thickness control meets the chemical resistance and drop-test requirements demanded by global safety regulations for chemical packaging.<\/p>\n<\/div>\n

\n

Flacons cosm\u00e9tiques<\/h3>\n

Lotion bottles, toner vials, serum bottles, and foundation containers in PS, ABS, and PP. The high-gloss surface delivered by this machine de moulage par injection-soufflage<\/strong><\/a> eliminates secondary polishing operations, and tight dimensional tolerances ensure consistent fitment with pump and spray closures across multi-million-unit cosmetic production runs.<\/p>\n<\/div>\n<\/div>\n

\n

Bouteilles de boissons<\/h3>\n

PP and high-clarity PS bottles for yogurt drinks, lactic acid bacteria beverages, vitamin shots, and functional drinks in 30 ml to 250 ml sizes. The food-contact material compatibility and contamination-free servo mechanism ensure safe, legally compliant production for food and beverage processors worldwide.<\/p>\n<\/div>\n

\n

Hand Wash Bottles<\/h3>\n

HDPE and LDPE hand wash bottles in 100 ml to 500 ml capacities, featuring pump-mount neck finishes. The ZQ80’s up to 8-cavity configuration for 250 ml bottles enables efficient high-volume production of branded personal care SKUs with consistent labeling surfaces and zero-flash bottle bodies.<\/p>\n<\/div>\n

\n

Flacons de gel douche<\/h3>\n

Body wash and shower gel containers in LDPE or PP, requiring smooth, print-receptive sidewalls and secure pump-thread finishes. The uniform wall thickness produced by this blow injection molding machine prevents stress whitening during decoration and supports hot-fill applications required for certain gel formulations.<\/p>\n<\/div>\n

\n

Flacons compte-gouttes<\/h3>\n

Ophthalmic dropper bottles in LDPE and PCTG from 5 ml to 30 ml are a core application for this led bulb cover injection blow molding machine platform. With up to 20 cavities for 10 ml output, the ZQ80 can sustain the ultra-high-volume production required by eye care brands and generic pharmaceutical manufacturers operating to ISO 15747 packaging standards.<\/p>\n<\/div>\n

\n

Bouteilles de liquide vaisselle<\/h3>\n

Dish soap and kitchen cleaner bottles in 250 ml to 1000 ml HDPE, featuring flip-cap or pump-mount necks. The ZQ80’s 3 to 4 cavities for 1000 ml and 5 to 6 cavities for 500 ml provide the scale needed for household chemical brands, while the scrap-free IBM process eliminates post-mold deflashing operations that add cost on extrusion blow alternatives.<\/p>\n<\/div>\n\n\n\n\n
\"Bouteilles<\/td>\n\"Bouteilles<\/td>\n<\/tr>\n
\"Bouteilles<\/td>\n\"Flacons<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

ZQ80 vs. Bloma IBM85 Model: Competitive Advantages<\/h2>\n

1. 20% Shorter Cycle Time
\nThe ZQ80 achieves 8.2 seconds per cycle for 30 ml bottles versus the hydraulic cycle of the Bloma IBM85. Over a 24-hour production day, this 20% cycle time improvement adds approximately 21,000 additional bottles without changing shift patterns, labor, or raw material cost structures, directly improving cost-per-unit economics for injection blow molding machine manufacturers’ customers worldwide.<\/p>\n

2. 30% Lower Energy Consumption
\nThe all-electric servo architecture of the ZQ80 consumes approximately 12 kWh per hour at full 30 ml production versus significantly higher figures typical of hydraulic IBM machines including the Bloma IBM85. Across a 300-day production year running three shifts, this energy reduction translates to tens of thousands of dollars in electricity cost savings and a substantially reduced carbon footprint for sustainability-reporting purposes.<\/p>\n

3. Superior Clamping Force
\nThe ZQ80 delivers 800 KN injection clamping force compared to the Bloma IBM85’s 700 KN, a 14% increase. The European-style clamping structure design provides 20 to 30% greater clamping force than many industry counterparts of equivalent size. This additional clamping margin reduces the risk of flash on high-cavity large-diameter bottle molds and extends mold component service life by reducing the mechanical stress applied to parting-line surfaces.<\/p>\n

4. Zero Hydraulic Oil Risk
\nThe Bloma IBM85 uses a hydraulic system for primary movements, creating a risk of oil contamination in the mold area that requires additional cleanroom controls in pharmaceutical applications. The ZQ80 eliminates the hydraulic system entirely for primary movements, operating all axes via servo motors. This provides a cleaner production environment, reduces fluid management costs, and simplifies compliance with FDA, EU GMP, and ISO 15378 pharmaceutical packaging standards.<\/p>\n

5. Higher Injection Weight Capacity
\nThe ZQ80 offers 466 g injection weight versus 310 to 280 g for the Bloma IBM85, providing significantly more melt capacity per shot. This allows larger preforms, higher gram-weight bottles, and more material-intensive containers to be produced without pushing the machine to its limits. Greater headroom translates to more stable processing conditions and better bottle-to-bottle weight consistency across long production runs.<\/p>\n

6. Larger Mold Platen
\nThe ZQ80 accommodates molds up to 800 x 400 mm versus 620 x 430 mm on the Bloma IBM85, an approximately 18% increase in platen area. The larger platen opens higher cavity counts for small-volume bottles and supports wider bottle diameters up to 120 mm, giving the ZQ80 greater product range flexibility and extending the useful life of the IBM machine investment as product mix evolves over time.<\/p>\n

\"Machine<\/p>\n

Compatible Raw Materials for IBM Machine<\/h2>\n
\n

PEHD<\/h3>\n

High-Density Polyethylene is the primary resin for pharmaceutical, chemical, and household product bottles on this injection blow molding machine. HDPE offers excellent chemical resistance, FDA and EU food-contact compliance, and broad compatibility with the ZQ80’s processing window. It is ideal for nasal spray bottles, chemical containers, and dairy packaging in the 30 ml to 1000 ml range.<\/p>\n<\/div>\n

\n

PEBD<\/h3>\n

Low-Density Polyethylene provides the flexible, squeezable bottle walls required for eyedropper bottles, cream tubes, and ketchup containers. LDPE’s low crystallinity and soft tactile properties are well-matched to the ZQ80’s gentle servo-controlled stripping mechanism, which preserves bottle geometry without the stress deformation that can occur with aggressive hydraulic ejection on older IBM machines.<\/p>\n<\/div>\n

\n

Polypropyl\u00e8ne (PP)<\/h3>\n

PP is the dominant material for hot-fill beverage bottles, yogurt drink containers, and autoclavable pharmaceutical vials processed on IBM machines. The ZQ80’s 4+N barrel zone heating system provides the precise melt temperature control required for PP, which has a relatively narrow processing window. PP bottles produced on this machine offer excellent clarity in clarified grades and outstanding hinge resistance for closure-integrated bottles.<\/p>\n<\/div>\n

\n

PVC<\/h3>\n

PVC is processed on the ZQ80 for cosmetic bottles and pharmaceutical liquid containers where the material’s inherent clarity and moderate barrier properties are valued. The precise temperature zoning of the injection barrel prevents the thermal degradation risk associated with PVC processing, and the optional stainless contact surface specifications address corrosion concerns from HCl off-gas during PVC molding operations on this injection blow moulding machine.<\/p>\n<\/div>\n

\n

PS (Polystyr\u00e8ne)<\/h3>\n

Standard and high-clarity PS grades are used for lactic acid bacteria bottles, yogurt drinks, and short-shelf-life food containers. High-transparent PS offers glass-like clarity without the weight and breakage risk, making it the preferred material for retail cosmetic bottles and premium food packaging. The ZQ80 handles both general-purpose and high-impact PS grades efficiently across cavity counts up to 20 for 10 ml sizes.<\/p>\n<\/div>\n

\n

ABS<\/h3>\n

ABS is selected for premium cosmetic bottles, fragrance components, and healthcare packaging requiring exceptional surface gloss and rigidity. Its superior dimensional stability under the clamping loads of the ZQ80 injection blow molding machine makes ABS suitable for tight-tolerance neck finishes on pump-mount cosmetic containers. ABS also accepts hot-stamping and in-mold labeling processes used extensively in the premium cosmetic packaging sector.<\/p>\n<\/div>\n

\n

PE Variants and Specialty Grades<\/h3>\n

Beyond standard HDPE and LDPE, the ZQ80 processes PCTG, EVA, and environmental corn-material (PLA-blend) resins, addressing the growing demand for sustainable packaging materials. These specialty PE-adjacent grades expand the application range of this plastic injection blow molding machine into biodegradable personal care packaging and eco-certified pharmaceutical primary packaging, which are among the fastest-growing segments for IBM machine adoption globally.<\/p>\n<\/div>\n\n\n\n\n
\"Machine<\/td>\n\"Machine<\/td>\n<\/tr>\n
\"Injection<\/td>\n\"Machine<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Maintenance Tips for the ZQ80 IBM Machine<\/h2>\n

Contr\u00f4les quotidiens
\nBefore each shift, verify compressed air supply pressure is within 0.8 to 1.2 MPa, confirm cooling water flow at 4 M\u00b3\/h and pressure at 0.3 to 0.4 MPa, inspect servo motor indicator lights for error codes, and clean the mold area to remove any material residue. Check the condition of mandrel sealing surfaces and wipe the HMI touchscreen. These daily steps take less than 15 minutes but prevent the majority of unplanned stoppages on this injection blow molding machine during multi-shift production.<\/p>\n

Weekly Lubrication
\nApply the specified lubricant grades to rotary table bearings, mandrel carrier guide rails, and mold open\/close linear bearings according to the lubrication schedule in the ZQ80 maintenance manual. Over-lubrication in the mold zone should be strictly avoided to maintain the hygienic environment required for pharmaceutical packaging. The grease nipple access points are positioned outside the mold area to facilitate clean lubrication without contamination risk.<\/p>\n

Monthly Electrical Inspection
\nMonthly, inspect all servo drive cabinet connections for tightness, check absolute encoder cable routing for chafing or pinching, verify that the PLC backup battery is within service life, and test the emergency stop circuit on the control panel. Dust accumulation in the electrical cabinet should be cleared with dry compressed air to prevent overheating of servo drives and control boards. Log all readings against the baseline commissioning data for trend analysis.<\/p>\n

Entretien du canon et de la vis
\nPurge the 55 mm screw at planned material changeovers using the supplier-recommended purging compound to prevent carbonized resin deposits in the barrel zones. Inspect the screw tip and check ring for wear every 2000 to 3000 operating hours and replace if gap measurements exceed the specification tolerances. Barrel heating element continuity should be verified quarterly to prevent cold spots that cause unmelt defects in the preform and downstream wall thickness variation in finished bottles.<\/p>\n

Mold Maintenance
\nClean injection and blow mold cavities after each production run using cavity-approved cleaning solvents and lint-free cloths. Inspect cavity surfaces, parting lines, and vents for wear marks or scoring at each mold change. The S136 and 4Cr13 steel alloy cavities should be polished to original specification when surface roughness exceeds the Ra threshold defined in the mold drawing package. Mold temperature controllers should be serviced and calibrated annually to maintain the zone-specific temperature accuracy that ensures consistent preform quality.<\/p>\n

R\u00e9vision annuelle
\nAn annual planned maintenance shutdown should include a comprehensive inspection of all servo motor bearings, replacement of any worn guide bushings, recalibration of all servo axis zero positions, and a full review of the hot runner thermocouple accuracy versus factory specification. Ever-Power’s after-sales team provides on-site annual overhaul service packages for ZQ80 injection blow molding machine customers in all major market regions, minimizing downtime and ensuring machines remain at specification for the full rated service life of the equipment.<\/p>\n

\"Moule<\/p>\n

Comment choisir la machine de moulage par injection-soufflage adapt\u00e9e<\/h2>\n
\n

1. Determine Bottle Volume Range<\/h3>\n

Start with your target bottle capacities. The ZQ80 covers 10 ml to 1000 ml, which matches the Bloma IBM85 operating range. If your primary SKU is below 50 ml, consider the ZQ60. If your main production is above 500 ml at high cavity count, evaluate the ZQ110. Matching tonnage class to bottle volume range is the single most important factor in selecting the right injection blow molding machine for your application.<\/p>\n<\/div>\n

\n

2. Define Required Daily Output<\/h3>\n

Calculate your required daily output by multiplying your production plan by a safety factor of 1.15 to allow for planned maintenance and material change time. The ZQ80 delivers up to 115,000 bottles per day for 30 ml bottles. If your daily requirement exceeds this, consider a second ZQ80 unit rather than stepping up to a larger machine class, which would require larger molds and higher tooling investment. Injection blow molding machine price per unit of daily output is an important comparative metric.<\/p>\n<\/div>\n

\n

3. Confirm Resin Compatibility<\/h3>\n

Verify that your specified resin grade, whether HDPE, PP, LDPE, PS, PVC, ABS, PCTG, or a specialty biopolymer, is compatible with the ZQ80’s 55 mm screw design and 4+N barrel zone heating range. Request processing parameter data sheets from Ever-Power for your specific resin grade before finalizing the machine specification. Some high-viscosity engineering resins may require a modified screw geometry that should be specified at the time of machine order for this plastic injection blow molding machine.<\/p>\n<\/div>\n

\n

4. Assess Mold Investment<\/h3>\n

If you are replacing a Bloma IBM85 Model, determine whether your existing molds can be adapted to the ZQ80’s 800 x 400 mm platen and 280 mm mold thickness envelope. In many cases, adapter plates allow existing Bloma IBM85 tooling to be mounted directly, protecting tooling investment. If purchasing new molds, request cavity count recommendations from Ever-Power’s mold engineering team based on your bottle volume and daily output targets. Mold cost per cavity for S136 tooling should be factored into total investment calculations.<\/p>\n<\/div>\n

\n

5. Evaluate Automation Requirements<\/h3>\n

Define your level of downstream automation at the specification stage. The ZQ80 supports integration with vision inspection systems for defect detection, side-leak testers for seal integrity, labeling machines, and automatic carton packing equipment. If your facility requires full unattended operation, specify these integrations with Ever-Power’s system integration team from the outset rather than retrofitting later. The automation package affects factory floor layout, compressed air requirements, and electrical load calculations for injection blow molding machine manufacturers sourcing complete turnkey systems.<\/p>\n<\/div>\n

\n

6. Request a Price-for-Injection-Blow-Molding-Machine Quotation<\/h3>\n

When requesting a price for injection blow molding machine from Ever-Power, provide your bottle drawings (or a sample Bloma IBM85 bottle), resin specification, required cavity count, daily output target, and downstream automation requirements. This information allows Ever-Power to prepare an accurate machine and mold package quotation. Lead time for the ZQ80 with standard mold configuration is typically 60 to 90 days from order confirmation, and installation support from Ever-Power engineers is available in all major market regions.<\/p>\n

\"Machine<\/p>\n

ISBM Machine vs. IBM Machine: Which Is Right for You?<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n
Fonctionnalit\u00e9<\/th>\nMachine ISBM<\/th>\nIBM Machine (ZQ80)<\/th>\n<\/tr>\n<\/thead>\n
Processus de travail<\/td>\ninjection, \u00e9tirage, moulage par soufflage<\/td>\nmoulage par injection, par soufflage<\/td>\n<\/tr>\n
Principe de moulage<\/td>\nBiaxial orientation enhances properties via stretching<\/td>\nBlow molding directly without stretching step<\/td>\n<\/tr>\n
Performance du produit<\/td>\nHaute r\u00e9sistance et excellente clart\u00e9 optique<\/td>\nUniform wall thickness, precise neck finish<\/td>\n<\/tr>\n
Forme du produit<\/td>\nFormes de bouteilles complexes et de grande taille<\/td>\nSimple and small bottle shapes, highest precision<\/td>\n<\/tr>\n
Primary Material<\/td>\nPrincipalement des animaux de compagnie<\/td>\nPE, PP, PVC, PS, ABS, PCTG<\/td>\n<\/tr>\n
Sc\u00e9narios d'application<\/td>\nCarbonated beverages, mineral water, cooking oil<\/td>\nPharmaceuticals, cosmetics, personal care, small FMCG<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

The injection stretch blow molding machine, commonly abbreviated as the ISBM machine, adds a mechanical stretching step between injection and blow molding. A stretch rod extends longitudinally through the preform during the blow cycle, orienting the polymer chains biaxially, which dramatically improves the tensile strength and optical clarity of the finished bottle.<\/p>\n

This is why the ISBM machine is the dominant technology for PET mineral water bottles, carbonated soft drink bottles, and edible oil containers, where a large, lightweight, high-clarity container with excellent CO2 barrier is required. Leading injection stretch blow molding machine manufacturers offer ISBM platforms specifically optimized for PET, where the biaxial orientation advantage is greatest. The single stage injection stretch blow molding machine processes PET from pellet to finished bottle in one integrated step, which is its key efficiency advantage over the two-stage reheat-blow process.<\/p>\n

The IBM machine, exemplified by the ZQ80 which replaces the Bloma IBM85 Model, does not employ a stretch rod. Instead, the preform is transferred directly from injection to the blow station on the mandrel while still warm, and blow air expands it to the cavity shape. Without the stretching step, the IBM process does not generate the biaxial molecular orientation that makes PET bottles so strong, but it also means the IBM machine is not limited to PET. HDPE, PP, LDPE, PS, PVC, and ABS are all processable on the IBM platform, covering the full range of pharmaceutical, cosmetic, and personal care bottle materials.<\/p>\n

The IBM machine also delivers unmatched neck-finish accuracy because the thread is formed in the injection step and locked dimensionally before any blowing occurs, whereas in ISBM the neck is formed under somewhat different thermal conditions. For small bottles from 5 ml to 500 ml requiring precise threads, GMP cleanroom compatibility, and multi-resin flexibility, the IBM injection blow molding machine is the correct technology choice. For large, lightweight, transparent PET beverage bottles in the 500 ml to 2000 ml range, the ISBM machine is the appropriate solution. Many factories operate both technologies in parallel to serve different product categories within a single packaging portfolio, working with injection blow molding machine suppliers like Ever-Power who offer both IBM and ISBM product lines.<\/p>\n

\"Machine<\/p>\n

Pourquoi choisir les machines de moulage par injection-soufflage d'Ever-Power ?<\/h2>\n

Mexico Ever-Power ISBM Machinery Co., Ltd. is primarily engaged in the research and development, production, sales, and trade of automatic one-step injection-blowing blow molding machines and supporting injection-blowing mold manufacturing. Our product range covers injection blow molding machines, extrusion blow molding machines, injection stretch blow molding machines, and auxiliary equipment. The company enjoys an advantageous geographical location and convenient logistics access to all major international shipping routes, enabling reliable delivery timelines for customers across Korea, India, Turkey, Russia, South Africa, Brazil, the United States, Mexico, and all other key markets for plastic injection blow molding machines globally.<\/p>\n

Ever-Power has an exceptional in-house R&D team comprising engineering and technical personnel with deep hands-on experience in both IBM machine design and injection-blowing mold engineering. With rich theoretical foundations and extensive practical field experience, our team provides customers with comprehensive pre-sale consultation, during-sale technical support, and after-sale service. From initial bottle design review through mold specification, machine FAT, on-site commissioning, and long-term maintenance support, Ever-Power manages the complete project lifecycle for each customer, functioning as a true turnkey injection blow molding machine manufacturer.<\/p>\n

Our product applications span pharmaceutical packaging, food packaging, healthcare packaging, cosmetic packaging, and broader plastic packaging categories. Ever-Power IBM machines process 1 ml to 1000 ml plastic containers in HDPE, LDPE, PP, PS (including lactic acid bacteria grade), high-transparent PS, ABS, environmental corn material, EVA, and PCTG. The company adheres to its core development tenet of self-reliance, integrity, pragmatism, innovation, and responsibility, building one-stop turnkey injection blow molding machine projects that deliver first-class quality and quantifiable production efficiency for customers competing in global markets. When evaluating injection blow molding machine suppliers for a replacement of Bloma IBM85 Model or a new greenfield installation, Ever-Power’s ZQ series represents the benchmark for value, precision, and after-sales reliability in the 40 to 135 ton IBM machine category.<\/p>\n

\"Fabricants<\/p>\n

Foire aux questions<\/h2>\n

Q1. What is the injection blow molding machine price for the ZQ80?<\/strong>
\nA: Injection blow molding machine price varies depending on the mold configuration, cavity count, downstream automation level, and destination market. The ZQ80 base machine price is available on request. Ever-Power provides complete package quotations including the ZQ80 machine, mold tooling, installation, and operator training. Contact our sales team with your bottle drawings, resin specification, and required daily output to receive an accurate price for injection blow molding machine tailored to your production requirements.<\/p>\n

Q2. Can the ZQ80 directly replace the Bloma IBM85 Model?<\/strong>
\nA: Yes. The ZQ80 is specifically designed as a direct replacement for the Bloma IBM85 Model. With an 800 KN injection clamping force (versus 700 KN on the Bloma IBM85), a 55 mm screw diameter, and a larger 800 x 400 mm platen, the ZQ80 matches or exceeds the Bloma IBM85 specifications in every key parameter. In many installations, existing Bloma IBM85 molds have been adapted to the ZQ80 using simple adapter plates, protecting tooling investment during the machine replacement process.<\/p>\n

Q3. Is the ZQ80 a full electric injection blow molding machine or does it use hydraulics?<\/strong>
\nA: The ZQ80 is a servo-driven full electric injection blow molding machine for all primary machine movements including injection, mold clamping, rotary table indexing, and stripping. A small hydraulic circuit is present only for the pressurized clamping booster function. This hybrid architecture delivers the energy efficiency and precision of an all electric injection blow molding machine while maintaining the robust clamping force generation that a purely electric linear drive system would require much larger servo motors to achieve at 80-ton class.<\/p>\n

Q4. What bottle materials can the ZQ80 injection blow molding machine process?<\/strong>
\nA: The ZQ80 processes HDPE, LDPE, Polypropylene (PP), PVC, PS (general purpose and high-clarity grades), ABS, PCTG, EVA, and environmental corn-material biopolymers. It is not designed for PET, which requires biaxial orientation via the ISBM machine process. For PET applications, Ever-Power offers a separate injection stretch blow molding machine product line. The ZQ80’s material range covers the full scope of pharmaceutical, cosmetic, personal care, and food packaging bottle applications in the IBM machine segment.<\/p>\n

Q5. How many cavities can the ZQ80 accommodate for 30ml bottles?<\/strong>
\nA: The ZQ80 accommodates up to 18 cavities for 30 ml bottle production. Cavity count for other sizes ranges from 20 cavities at 10 ml to 3 to 4 cavities at 1000 ml. The maximum cavity count for your specific bottle depends on bottle diameter, gram weight, and neck finish configuration. Ever-Power’s mold engineering team will confirm the optimal cavity count for your application based on your bottle drawing and production volume targets when you request a customized injection blow molding machine for sale quotation.<\/p>\n

Q6. What is the difference between an IBM machine and an ISBM machine for pharmaceutical bottle production?<\/strong>
\nA: The IBM machine uses a two-station process: inject the preform, then blow it to final shape. The ISBM machine adds a mechanical stretching step, which is beneficial for PET beverage bottles but not required or beneficial for the materials used in pharmaceutical packaging. Pharmaceutical bottles in HDPE, PP, LDPE, and PCTG are universally produced on IBM machines because the process delivers superior neck-finish accuracy, no weld lines, no flash, and a clean mold environment compatible with GMP requirements. The ZQ80 is the preferred pharmaceutical injection blow molding machine in the 80-ton clamping class globally.<\/p>\n

Q7. Can the ZQ80 produce LED bulb cover products in addition to bottles?<\/strong>
\nA: Yes. The ZQ80 is a capable led bulb cover injection blow molding machine for transparent PS and PC LED light covers in round and cylindrical profiles within its 120 mm maximum diameter and 220 mm height envelope. LED covers benefit from the IBM process because the glass-like optical clarity of transparent PS and the precise wall thickness uniformity essential for even light diffusion are both achievable within the ZQ80’s processing parameters. Contact Ever-Power’s application engineering team with your LED cover dimensions to confirm suitability.<\/p>\n

Q8. What installation and commissioning support does Ever-Power provide?<\/strong>
\nA: Every ZQ80 shipment includes a factory acceptance test (FAT) at the Ever-Power facility with customer or representative witness option. On-site installation and commissioning support is provided by Ever-Power engineers at the customer’s facility. The commissioning period typically runs 7 to 14 days, during which operators are trained on machine setup, parameter adjustment, routine maintenance procedures, and troubleshooting. Remote support via video call and data logging access is available post-commissioning for all ZQ80 injection blow molding machine customers worldwide.<\/p>\n

Q9. What are the utility requirements for the ZQ80 injection blow molding machine?<\/strong>
\nA: The ZQ80 requires a three-phase electrical supply for its 55 KW total installed power, with operating power typically ranging between 52% and 70% of rated capacity. Compressed air supply must be capable of 0.8 to 1.2 MPa at 0.8 M\u00b3\/min flow. Cooling water must be supplied at 0.3 to 0.4 MPa with a flow rate of 4 M\u00b3\/h. The machine footprint is 4.5 x 1.6 m with a height of 2.0 m and a net weight of 10 tons. These utility specifications should be verified with your facility infrastructure team before finalizing the injection blow molding machine order and floor plan.<\/p>\n

Q10. Is the ZQ80 suitable for small packaging factory operations or only large-scale manufacturers?<\/strong>
\nA: The ZQ80 is designed to serve both large pharmaceutical and FMCG manufacturers running continuous three-shift operations and mid-scale cosmetic and personal care bottle producers. Its compact footprint of 4.5 x 1.6 m, relatively low utility consumption of approximately 12 kWh per hour, and simple HMI make it practical for operations without dedicated IBM machine maintenance engineers. The ZQ80’s ability to run multiple bottle sizes on different mold sets also makes it attractive for contract packaging operations serving multiple brands with varied bottle specifications on a single injection blow molding machine platform.<\/p>\n

\"Machine<\/p>\n

Avis clients<\/h2>\n

Jung Min-seo, Pharmaceutical Packaging, Korea<\/strong>
\n“We replaced our Bloma IBM85 with the ZQ80 about eight months ago and honestly the difference in energy bills alone has been noticeable. We run 30ml pharmaceutical syrup bottles in HDPE, 18 cavities, and we are consistently hitting around 108,000 to 112,000 bottles per shift. The servo system is very quiet compared to the old hydraulic machine and our maintenance team says it is much less to work on. Installation was smooth and the Ever-Power engineer stayed on-site for two weeks until we were fully running. Happy with the decision.”<\/p>\n

Ankit Mehrotra, Cosmetic Industry, India<\/strong>
\n“We purchased a ZQ80 for our cosmetic bottle line in Mumbai about a year back. We do 60ml lotion bottles in transparent PS, 14 cavities. The surface finish quality is genuinely excellent, better than what we were getting from our previous machine in the same class. I was a bit worried about after-sales support from China but the team has been responsive and spare parts arrived faster than expected. The machine paid for itself quicker than the finance team projected. We are already looking at a second unit.”<\/p>\n

Emre Yilmaz, Personal Care, Turkey<\/strong>
\n“We run the ZQ80 for 250ml shampoo and body wash bottles in HDPE, 8 cavity setup. The clamping force is noticeably stronger than the competitors we evaluated and the bottles come out with very even wall thickness. Delivery took about 75 days from order confirmation to port. The shipping packaging was good and nothing was damaged. The price for the injection blow molding machine was competitive relative to European alternatives and the mold quality was better than we expected at this price point. Would recommend to other Turkish manufacturers looking at this size range.”<\/p>\n

Fernanda Zandei, Chemical Packaging, Brazil<\/strong>
\n“Our company in Sao Paulo has been using the ZQ80 for 120ml chemical bottles in HDPE for about 14 months. We chose it partly because of the clean-mold-zone design, which is important for our ISO audit requirements. The machine runs three shifts and so far we have not had any major downtime issues. The servo drives are quiet, vibration is minimal, and the HMI is straightforward enough that our operators adapted quickly. Spare parts availability in Brazil could be improved but overall we are satisfied and would buy from Ever-Power again.”<\/p>\n

Dmitri Voronov, Pharma Packaging, Russia<\/strong>
\n“We operate a ZQ80 running 10ml ophthalmic dropper bottles in LDPE, 20 cavities, and the output consistency is what impressed me most. Gram weight variation is within 0.8% cavity-to-cavity which is well within our GMP limits. The neck dimensions on every bottle are perfect for our dropper insert fitment. We had one thermocouple go out after six months and the Ever-Power support team diagnosed it remotely via video and the replacement arrived within the week. For pharmaceutical IBM machine applications at this scale I would not hesitate to recommend the ZQ series.”<\/p>\n

Sipho Dlamini, Formosa Plastics, South Africa<\/strong>
\n“We sourced the ZQ80 after comparing it against similar tonnage injection blow molding machine manufacturers in Europe and Asia. The mold platen area is larger than the Bloma IBM85, which is why we picked it. Our main production is 300ml and 500ml personal care bottles in PP. The vision inspection system integration at the outfeed was done very cleanly. The Ever-Power team handled the FAT at the factory and the machine performed exactly to spec. Shipping to Johannesburg was well coordinated and the machine cleared customs without issues.”<\/p>\n

James Carter, Beverage Packaging, United States<\/strong>
\n“This is the second ZQ80 we have bought and I will probably order a third. We run 100ml PP lactic acid bacteria bottles, 12 cavity, for a major beverage brand. The cycle time improvement over our old machine has been significant, somewhere around 18 to 19 percent faster, which adds up to about 17,000 extra bottles per day. The machine is genuinely easy to keep running and our preventive maintenance schedule takes about 40 minutes per week. The price for injection blow molding machine at this output level is very competitive.”<\/p>\n

Maria Gonzalez, Cosmetic Industry, Mexico<\/strong>
\n“We are running the ZQ80 for 400ml cosmetic bottles in ABS, 6 cavities. The surface gloss straight off the machine is outstanding. The sales team at Ever-Power was very patient with our specification process and helped us size the mold correctly for our bottle design. The installation engineer was professional and thorough. We had a minor issue with one of the cooling water connections during commissioning but it was resolved same day. Two years on, the machine is still performing consistently. Logistics to Mexico was handled well.”<\/p>\n

Carlos Ibarra, FMCG Packaging, Mexico<\/strong>
\n“We evaluated the ZQ80 specifically as a replacement for the Bloma IBM85 we were retiring. The platen dimensions and clamping force matched well enough that we could reuse three of our existing molds with minor adapter plates. That saved us a significant amount on tooling. The machine itself runs cleaner and quieter than the IBM85 ever did. Our energy meter shows exactly the savings claimed. Delivery to our Monterrey facility took 68 days from order which was within the promised window. Very satisfied overall with both the machine and the service.”<\/p>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

Our company provides a high-efficiency and energy-saving ZQ80 Injection Blow Molding Machine Replacement for Bloma IBM85 Model, purpose-built for mass production of small and medium-sized plastic bottles. Equipped with precise temperature and pressure control systems, this blow injection moulding machine ensures uniform wall thickness, smooth surface finish, and stable dimensional accuracy across every production run. Applications span pharmaceutical bottles, cosmetic containers, personal care packaging, food-grade HDPE bottles, beverage containers, and chemical packaging, making it one of the most versatile plastic injection blow molding machines available in the 80-ton clamping class today.<\/p>","protected":false},"featured_media":1259,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[38],"product_tag":[45,46,47,49,42,39,48,43,44,50,40,51,41,52,53],"class_list":["post-1341","product","type-product","status-publish","has-post-thumbnail","product_cat-injection-blow-molding-machine","product_tag-all-electric-injection-blow-molding-machine","product_tag-best-injection-blow-molding-machine","product_tag-blow-injection-molding-machine","product_tag-full-electric-injection-blow-molding-machine","product_tag-ibm-injection-blow-molding-machine","product_tag-injection-blow-molding-machine","product_tag-injection-blow-molding-machine-for-sale","product_tag-injection-blow-molding-machine-manufacturers","product_tag-injection-blow-molding-machine-price","product_tag-injection-blow-molding-machine-suppliers","product_tag-injection-blow-molding-machines","product_tag-injection-blowing-molding-machine","product_tag-one-step-injection-blow-molding-machine","product_tag-pet-injection-blow-molding-machine","product_tag-plastic-injection-blow-molding-machine","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-blowmolding.com\/fr\/wp-json\/wp\/v2\/product\/1341","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-blowmolding.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-blowmolding.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-blowmolding.com\/fr\/wp-json\/wp\/v2\/media\/1259"}],"wp:attachment":[{"href":"https:\/\/isbm-blowmolding.com\/fr\/wp-json\/wp\/v2\/media?parent=1341"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-blowmolding.com\/fr\/wp-json\/wp\/v2\/product_brand?post=1341"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-blowmolding.com\/fr\/wp-json\/wp\/v2\/product_cat?post=1341"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-blowmolding.com\/fr\/wp-json\/wp\/v2\/product_tag?post=1341"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}